Informasi Detail
Deskripsi Produk

Informasi Detail
Ukuran:	Dapat disesuaikan (Diameter Dalam, Diameter Luar, Panjang)	Resistensi Dampak:	Bagus sekali
Penggunaan:	Lengan Pemandu, Lengan Penentu Lokasi	Ukuran:	Dapat disesuaikan, Gambar Klien
Melayani:	Layanan yang disesuaikan	Layanan OEM:	Dapat diterima
OEM:	Tersedia	Kekasaran Permukaan:	1,6~0,1
membentuk:	Trapesium, silinder	Suhu Kerja:	-200 ° C ~ +800 ° C.
Ketahanan korosi:	Bagus sekali	Kata kunci:	bantalan tungsten karbida
Ketahanan Korosi:	Bagus sekali	Sedang mengemas:	Paket Ekspor Standar
Menyoroti:	Customizable Dimensions Non-Magnetic Alloy Center Ring , Excellent Corrosion Resistance Precision Machined Ring , Precision Machined Tungsten Carbide Sleeve

Deskripsi Produk

Non-Magnetic Alloy Center Rings

Precision Machined Rings for Shielding, Spacing & Mounting

Our precision-machined center rings offer zero magnetic interference, excellent dimensional stability, and corrosion resistance for use in electronics, medical devices, and research equipment. Custom sizes and materials available.

Why Choose Our Non-Magnetic Rings?

Guaranteed Non-Magnetic Performance: Manufactured from carefully selected copper-nickel, aluminum-bronze, or other non-ferrous alloys, these rings are inherently free from iron and cobalt. They ensure zero magnetic attraction (permeability µ ≈ 1.0) and will not disrupt sensitive magnetic fields.
Superior Machinability & Precision: Unlike brittle alternatives like ceramics, our non-magnetic alloys can be machined to exceptionally tight tolerances with excellent surface finishes. We achieve precise IDs, ODs, and parallelism (±0.005mm standard, tighter on request).
Excellent Corrosion Resistance & Conductivity: Many of our alloy options offer good to excellent resistance to corrosion from moisture, chemicals, and salts. Certain alloys also provide beneficial electrical or thermal conductivity.
Lightweight & Cost-Effective Alternative: Compared to dense tungsten-based non-magnetic materials, our alloy rings offer a favorable strength-to-weight ratio and are often more economical, especially for larger diameters.

Technical Specifications

We provide standard and fully custom-machined rings. Below are our common capabilities.

Parameter	Specification / Standard Offering
Primary Materials	Cupronickel (e.g., C71500), Aluminum Bronze, Non-Magnetic Stainless Steels (e.g., 316L), Other Engineered Non-Ferrous Alloys
Key Properties	Non-Magnetic (µ ≈1.0), Good Machinability, Corrosion Resistant, Electrically Conductive (material dependent)
Standard Diameter Range	Inner Diameter (ID): From 2mm \| Outer Diameter (OD): Up to 300mm
Standard Thickness/Width	From 1mm to 50mm
Standard Tolerances	ID/OD: ±0.02mm \| Thickness: ±0.01mm \| Can achieve ±0.005mm for critical dimensions
Surface Finish	Standard Machined: Ra 1.6 μm \| Fine Machined: Ra 0.8 μm or better
Additional Features	Can be supplied with grooves, threads, holes, or special coatings as per print

Target Applications & Industries

These versatile rings serve as crucial components across a wide range of high-tech fields.

Industry	Typical Use Cases
Electronics & Semiconductor	RF Shielding Gaskets, Vacuum Chamber Spacers, Sensor Mounting Rings within production equipment. Prevents eddy currents and magnetic interference.
Medical & Diagnostic Imaging	Non-Magnetic Hardware, Spacers, and Supports inside MRI and CT scanners. Ensures patient safety and image fidelity.
Aerospace & Defense	Shielding Rings, Conductive Bushings, and Structural Spacers in guidance systems and avionics where magnetic signature must be minimized.
Research & Instrumentation	Sample Holders, Collimators, and Mounting Rings in electron microscopes, spectrometers, and physics experiments.
General Precision Engineering	Insulating Spacers, Alignment Rings, and Wear-Resistant Bushings in any machinery where non-magnetic properties are specified.

Why Source From Us?

Material Expertise: We guide you to the optimal alloy (CuNi, Al Bronze, etc.) balancing non-magnetic properties, strength, corrosion resistance, and budget for your specific case.
Precision Manufacturing Focus: We specialize in turning simple ring specifications into high-precision, ready-to-install components that fit perfectly the first time.
Full Customization & Support: We manufacture to your exact blueprint. Provide a sketch, drawing, or CAD file, and we handle the rest.

Label:

Detail produk:
Tempat asal:	Cina
Nama merek:	Sanxin
Sertifikasi:	ISO
Nomor model:	SX1290
Syarat-syarat pembayaran & pengiriman:
Kuantitas min Order:	2
Waktu pengiriman:	5-25 hari
Syarat-syarat pembayaran:	T/T, L/C, Western Union

Non-Magnetic Alloy Center Rings with Customizable Dimensions and Excellent Corrosion Resistance for Precision Machined Applications

Customizable Dimensions Non-Magnetic Alloy Center Ring

Excellent Corrosion Resistance Precision Machined Ring

Precision Machined Tungsten Carbide Sleeve

bagian tungsten carbide

lengan baja yang dikeraskan

bagian aus karbida

Kursi katup lengan karbida semen dan inti katup untuk industri minyak & gas

Busing Tungsten Karbida Tahan Korosi Kekerasan Tinggi dengan Ukuran yang Dapat Disesuaikan untuk Peralatan Pengeboran Minyak

Selongsong Tungsten Karbida yang Dipoles Cermin dengan Ketahanan Aus Tak Tertandingi dan Ketahanan Panas Unggul untuk Silinder Piston

OEM Mold Sleeve Steel Pipe Tinggi-Kekuatan Bahan Baru Cemented Carbide Bushings

Sleeve Karbida Tungsten Kekerasan Tinggi Lanjutan untuk Mesin Berat

Selongsong Tungsten Karbida Kustom dengan Ketahanan Aus Tinggi untuk Aplikasi Dudukan Katup Minyak dan Gas

Selongsong Pembalik Rasio Karbida Tungsten Presisi Tinggi dengan Permukaan Halus dan Ketahanan Aus yang Sangat Baik untuk Aplikasi Tugas Berat

Pipa Karbida Tungsten Non-Magnetik dengan HRA 90-92 Kekerasan dan Spesifikasi Dimensi Presisi untuk Penggunaan Industri

Zhuzhou Sanxin Semen Karbida Manufacturing Co, Ltd